GB/T 3286.3-2012 石灰石及白云石化学分析方法 第3部分:氧化铝含量的测定 铬天青S分光光度法和络合滴定法
时间:2024-05-20 09:51:27 来源: 标准资料网 作者:标准资料网 阅读:8859
基本信息
标准名称: | 石灰石及白云石化学分析方法 第3部分:氧化铝含量的测定 铬天青S分光光度法和络合滴定法 |
英文名称: | Methods for chemical analysis of limestone and dolomite - Part 3: The determination of aluminium oxide content - The chrome azurol S spectrophotometric method and the complexometric titration method |
中标分类: |
矿业 >>
非金属矿 >>
冶金辅助原料矿 |
替代情况: | 替代GB/T 3286.3-1998 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2012-11-05 |
实施日期: | 2013-05-01 |
首发日期: | 1982-07-09 |
作废日期: | |
主管部门: | 中国钢铁工业协会 |
归口单位: | 全国钢标准化技术委员会 |
起草单位: | 武汉钢铁(集团)公司、武汉科技大学、冶金工业信息标准研究院 |
出版社: | 中国标准出版社 |
出版日期: | 2013-05-01 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 矿业 非金属矿 冶金辅助原料矿
Product Code:SAE AIR5020
Title:Time-Dependent In-Flight Thrust Determination
Issuing Committee:E-33 In Flight Propulsion Measurement Committee
Scope: The purpose and intent of Subcommittee E-33E's effort, the reporting objectives, and the limitations inherent in the reported findings and recommendations are reviewed since these factors are the basis of the information contained in this document. SAE E-33E Subcommittee was formed to assess the level of industry experience that exists in the area of thrust determination during aircraft time-variant operating conditions. A prime objective was to provide a center for gathering expertise and to be a forum for the exchange of ideas and viewpoints. The committee recognized that a practice for the rigorous treatment of time-dependent thrust did not exist and that several critical aspects of its accounting would need to be investigated. The specific objectives of this document are: a. to examine aircraft and engine operating conditions under which the quasi-steady thrust assumption is valid; b. to determine the extent to which time-dependent (nonstationary) force accounting for engine net thrust and propulsion system throttle-dependent terms is required, consistent with existing and developing thrust-minus-drag techniques; c. to report time-dependent thrust methodologies and measurement techniques used for flight and ground testing; d. to present the results of a data review of state-of-the-art methodology appropriate to the determination of aircraft-installed thrust during quasi-steady and dynamic maneuvers; and e. to provide guidelines for validating and improving time-depend thrust and propulsion system throttle-dependent terms is required, consistent with existing and developing thrust-minus-drag techniques; c. to report time-dependent thrust methodologies and measurement techniques used for flight and ground testing; d. to present the results of a data review of state-of-the-art methodology appropriate to the determination of aircraft-installed thrust during quasi-steady and dynamic maneuvers; and e. to provide guidelines for validating and improving time-depend thrust and propulsion system throttle-dependent terms is required, consistent with existing and developing thrust-minus-drag techniques; c. to report time-dependent thrust methodologies and measurement techniques used for flight and ground testing; d. to present the results of a data review of state-of-the-art methodology appropriate to the determination of aircraft-installed thrust during quasi-steady and dynamic maneuvers; and e. to provide guidelines for validating and improving thrust and propulsion system throttle-dependent terms is required, consistent with existing and developing thrust-minus-drag techniques; c. to report time-dependent thrust methodologies and measurement techniques used for flight and ground testing; d. to present the results of a data review of state-of-the-art methodology appropriate to the determination of aircraft-installed thrust during quasi-steady and dynamic maneuvers; and e. to provide guidelines for validating and improving time-dependent thrust determination as appropriate to a specific program.【英文标准名称】:Metallicpowders,excludingpowdersforhardmetals-Determinationofdimensionalchangesassociatedwithcompactingandsintering(ISO/FDIS4492:2012);GermanversionFprENISO4492:2012
【原文标准名称】:硬金属粉末除外的金属粉末.压缩和烧结相关尺寸变化的测定(ISO/FDIS4492-2012).德文版本FprENISO4492-2012
【标准号】:DINENISO4492-2012
【标准状态】:现行
【国别】:德国
【发布日期】:2012-09
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:压实;致密材料;尺寸精度;尺寸变化;尺寸测量;尺寸稳定性试验;尺寸规格;金属粉末;金属;粒状材料;粉末;粉末冶金;压制;试样;烧结;试验报告;试验
【英文主题词】:Compacting;Compacts(materials);Dimensionalaccuracy;Dimensionalchanges;Dimensionalmeasurement;Dimensionalstabilitytests(textiles);Dimensions;Metallicpowders;Metals;Particulatematerials;Powder;Powdermetallurgy;Pressing(forming);Samples;Sintering;Testreports;Testing
【摘要】:
【中国标准分类号】:
【国际标准分类号】:77_160
【页数】:13P;A4
【正文语种】:德语